When selecting the model, Grinding machine you should first consider what kind of raw material the crusher purchased is crushed. For crushing cereal feed, the top-feed hammer blade crusher can be selected; for crushing bran wheat feed, Grinding machine the claw crusher can be selected; if it is required to have good versatility, Grinding machine such as crushing cereals，Taking into account the cake valley and the straw, you can choose the tangential feed hammer mill; to crush the shellfish and other mineral feeds, Grinding machine you can use the shellless sieve mill; if it is used for the pretreatment of pre-mixed feed, Grinding machine the size of the product crushing is required If it is very thin and can be adjusted according to the needs, Grinding machine special non-sieve grinder should be selected.
The instructions and nameplate of the general grinder contain the rated production capacity (kg/h) of the grinder. However, it should be noted that the rated production capacity is generally based on crushed corn, Grinding machine the water content is stored safe water (about 13%) and the φ1.2mm aperture sieve flake is subject to the output, Grinding machine because corn is commonly used grain For feed, a screen with a diameter of 1.2 mm is the smallest screen hole commonly used. At this time, Grinding machine the production capacity is small, Grinding machine which considers the more common and difficult state in production. The production capacity of the selected pulverizer is slightly larger than the actual production capacity. When the production capacity of the pulverizer is reduced due to the abrasion of the hammer blades and air leakage, Grinding machine it will not affect the continuous production and supply of feed.
For more information, please visit www.famsun-cn.com
